| CENTER TO CENTER DISTANCE BETWEEN TERMINAL HOLES | 41.000 INCHES NOMINAL |
| CONDUCTOR FORM | STRANDED ALL CONDUCTORS |
| CROSS SECTION OUTSIDE DIAMETER | 0.827 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FSC APPLICATION DATA | NHA PART NUMBER 3480928 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CABLE ASSY, 0000GA, 41.0, 1136 |
| PROPRIETARY CHARACTERISTICS | PACS |
| ROUND CONDUCTOR SIZE | 4 AWG ALL CONDUCTORS |
| SPECIAL FEATURES | CABLE SHALL BE COVERED WITH UNSLIT ADR-APPROVED CONVOLUTED TUBING; TUBING SHALL EXTEND UNDER HEAT SHRINK TUBING NOT MORE THAN 1 INCH; TERMINALS SHALL BE ENCLOSED WITH SHRINKABLE POLYOLEFIN TUBING WITH MELTABLE INNER WALL AND AN APPLIED THICKNESS OF 1 INCH; TUBING TO COVER ENTIRE BARREL OF TERMINAL AND TO EXTEND PAST THE WIRE ENTRY ONTO THE WIRE INSULATION A MIN OF 0.5 INCH; TUBING NOT TO EXTEND ONTO THE TONGUE OF THE TERMINAL; WELDING CABLE CLASS K; CONDUCTOR STRANDED BARE COPPER; AWG SIZE 4/0; STRANDING 2112 X 30; INSULATION ETHYLENE PROPLYENE DIENE MONOMER, EPDM; INSULATION THICKNESS 0.105 INCH; NOMINAL CABLE CO 0.827 INCH; COLOR BLACK; VOLTAGE RATING 600 V; HEAVY DUTY FLARED BATTERY LUG; MIN THICK 0.110 INCH; MATERIAL ETC, ELECTROLYTIC TOUGH PITCH, CDA-110, ASTM-B-152 COPPER TERMINAL TO BE DEEP DRAWN COPPER SO TONGUE END IS COMPLETELY WITHOUT ANY OPENING AND WIRE MARKING, 4/0, STAMPED ON BARREL END |
| TEMP RATING | -67.0 DEG FAHRENHEIT AND 194.0 DEG FAHRENHEIT |
| TERMINAL LUG APERTURE SIZE | 0.380 INCHES 2ND END SINGLE CONDUCTOR |
| TERMINAL LUG STYLE | STRAIGHT W/MOUNTING HOLE 2ND END SINGLE CONDUCTOR |
| TERMINAL MANUFACTURER IDENTIFYING REFERENCE NUMBER | LCA250-38F-X 2ND END SINGLE CONDUCTOR |
| TERMINATION TYPE | LUG TERMINAL W/MOUNTING HOLE 2ND END SINGLE CONDUCTOR |
| TERMINATION TYPE | TERMINAL CAP TUBE 1ST END SINGLE CONDUCTOR |