| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE IDENTICAL ENDS |
| TERMINAL TYPE AND QUANTITY | 3 THREADED STUD |
| THREAD CLASS | 2A SECOND END |
| THREAD DIRECTION | LEFT-HAND SECOND END |
| THREAD LENGTH | 1.380 INCHES NOMINAL SECOND END |
| THREAD QUANTITY PER INCH | 20 SECOND END |
| THREAD SERIES DESIGNATOR | UN SECOND END |
| DUTY CYCLE | CONTINUOUS |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 100.0 LINE TO LINE LOW INPUT OR 115.0 LINE TO LINE HIGH INPUT |
| COOLING METHOD | AMBIENT AIR |
| FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE |
| FLAT DEPTH | 0.203 INCHES NOMINAL FIRST END |
| FLATTED PORTION LENGTH | 1.530 INCHES NOMINAL FIRST END |
| FREQUENCY IN HERTZ | 50.0 INPUT OR 60.0 INPUT |
| LENGTH OF SHAFT FROM HOUSING | 1.910 INCHES FIRST END |
| LENGTH OF SHAFT FROM HOUSING | 3.380 INCHES SECOND END |
| III OVERALL LENGTH | 13.590 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| INCLOSURE FEATURE | GENERAL PURPOSE |
| PHASE | SINGLE INPUT |
| POWER RATING | 0.500 HORSEPOWER OUTPUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.750 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.250 INCHES |
| NOMINAL THREAD SIZE | 0.500 INCHES SECOND END |
| OVERALL HEIGHT | 5.812 INCHES |
| OVERALL WIDTH | 5.625 INCHES |
| ROTOR SPEED RATING IN RPM | 1725.0 SINGLE NO LOAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.000 INCHES FIRST END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.000 INCHES SECOND END |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE SECOND END AND A9 SECOND STYLE SECOND END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE FIRST END |
| SHAFT DIAMETER | 0.500 INCHES NOMINAL FIRST END |
| SHAFT DIAMETER | 0.625 INCHES NOMINAL SECOND END |