| DUTY CYCLE | INTERMITTENT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 120.0 LINE TO LINE LOW INPUT OR 208.0 LINE TO LINE HIGH INPUT |
| COOLING METHOD | AIR TO AIR COOLED |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| FULL TOOTH LENGTH | 0.500 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 0.870 INCHES SINGLE END |
| III OVERALL LENGTH | 6.765 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| PHASE | THREE INPUT |
| POWER RATING | 0.120 HORSEPOWER OUTPUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | PAD |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.962 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.962 INCHES |
| OVERALL HEIGHT | 3.620 INCHES |
| OVERALL WIDTH | 3.620 INCHES |
| ROTOR SPEED RATING IN RPM | 3600.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A17 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.304 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| WINDING TYPE | INDUCTION-WOUND ROTOR |
| TEETH QUANTITY | 12 SINGLE END |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| TIME INTERVAL | 2.0 MINUTES MAXIMUM ON AND 4.0 MINUTES MINIMUM OFF |