| DUTY CYCLE | INTERMITTENT |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | FAN COOLED |
| CURRENT RATING IN AMPS | 128.000 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| FRAME SIZE DESIGNATION | 405 |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| OVERALL HEIGHT | 26.500 INCHES |
| OVERALL LENGTH | 42.250 INCHES |
| OVERALL WIDTH | 22.875 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| PHASE | THREE INPUT |
| POWER RATING | 100.0000 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 1775.0 SINGLE FULL LOAD |
| SHAFT END STYLE | INTERNAL THREADED AND SPLINED FIRST END |
| SHAFT END STYLE | INTERNAL THREADED AND SPLINED SECOND END |
| SHAFT DIAMETER | 0.986 INCHES MINIMUM AND 0.991 INCHES MAXIMUM FIRST END |
| SHAFT DIAMETER | 2.115 INCHES MINIMUM AND 2.116 INCHES MAXIMUM SECOND END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SECOND END |
| SHAFT ROTATION DIRECTION | CLOCKWISE FIRST END |
| SPECIAL FEATURES | MTG HOLES TO BE DRILLED ON INSTL |
| SPLINE QUANTITY | 19 FIRST END |
| SPLINE QUANTITY | 33 SECOND END |
| SPLINE LENGTH | 1.437 INCHES NOMINAL FIRST END |
| SPLINE LENGTH | 2.188 INCHES MINIMUM SECOND END |
| SPLINE MINOR DIAMETER | 0.876 INCHES MINIMUM AND 0.886 INCHES MAXIMUM FIRST END |
| SPLINE MINOR DIAMETER | 1.972 INCHES MINIMUM AND 1.983 INCHES MAXIMUM SECOND END |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| TEMP RATING | 50.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| THREAD LENGTH | 1.062 INCHES NOMINAL SECOND END |
| THREAD LENGTH | 0.875 INCHES NOMINAL FIRST END |
| TIME INTERVAL | 1.0 HOURS MAXIMUM ON |