| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | OPEN PROTECTED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING IN AMPS | 1.600 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 50.0 OR 60.0 INPUT |
| HOLE DIAMETER | 0.138 INCHES NOMINAL SECOND END |
| HOLE CENTER TO SHAFT END DISTANCE | 0.188 INCHES NOMINAL SECOND END |
| HOLE DEPTH | 0.312 INCHES NOMINAL SECOND END |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 1.000 INCHES FIRST END |
| LENGTH OF SHAFT FROM HOUSING | 1.000 INCHES SECOND END |
| OVERALL HEIGHT | 3.750 INCHES |
| OVERALL LENGTH | 7.188 INCHES |
| OVERALL WIDTH | 3.750 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 2.875 INCHES |
| MOUNTING METHOD | FACE |
| PHASE | SINGLE INPUT |
| POWER RATING | 0.0500 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 3450.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE FIRST END |
| SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SECOND END |
| SHAFT DIAMETER | 0.3120 INCHES NOMINAL IDENTICAL ENDS |
| SHAFT ROTATION DIRECTION | CLOCKWISE FIRST END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SECOND END |
| SPECIFIC USE | TELETYPE PRINTER,MODEL NO. M-40 |
| WINDING TYPE | INDUCTION-SHADED POLE |
| TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, PLUG AND 3 WIRE LEAD |