| DUTY CYCLE | INTERMITTENT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 26.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NONVENTILATED |
| CURRENT RATING IN AMPS | 1.000 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| LENGTH OF SHAFT FROM HOUSING | 0.618 INCHES SINGLE END |
| III OVERALL LENGTH | 3.873 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| POWER RATING | 0.003 HORSEPOWER OUTPUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | PAD |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.375 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.375 INCHES |
| OVERALL HEIGHT | 1.620 INCHES |
| OVERALL WIDTH | 1.650 INCHES |
| ROTOR SPEED RATING IN RPM | 2000.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.188 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| SPLINE LENGTH | 0.618 INCHES NOMINAL SINGLE END |
| SPLINE MINOR DIAMETER | 0.062 INCHES NOMINAL SINGLE END |
| SPLINE QUANTITY | 6 SINGLE END |
| WINDING TYPE | SERIES WOUND |
| TEMP RATING | -65.0 OPERATING DEG FAHRENHEIT AND 160.0 OPERATING DEG FAHRENHEIT |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| TIME INTERVAL | 3.0 MINUTES MAXIMUM ON AND 17.0 MINUTES MINIMUM OFF |