| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | OPEN PROTECTED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | FAN COOLED |
| CURRENT RATING IN AMPS | 0.700 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FLAT CENTER TO SHAFT END DISTANCE | 1.1880 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.0620 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.3120 INCHES NOMINAL SINGLE END |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 1.375 INCHES SINGLE END |
| OVERALL HEIGHT | 3.500 INCHES |
| OVERALL LENGTH | 6.874 INCHES |
| OVERALL WIDTH | 3.438 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.625 INCHES |
| PHASE | SINGLE INPUT |
| POWER RATING | 0.0833 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 3600.0 SINGLE FULL LOAD |
| SHAFT DIAMETER | 0.3120 INCHES NOMINAL SINGLE END |
| SHAFT END CHARACTERISTIC | A6 SINGLE STYLE SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.687 INCHES SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SPECIAL FEATURES | SHAFT END STYLE A6,EXCEPT ADDITIONAL FLAT AT 90 DEGREES,SAME DIM. |
| WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| TEMP RATING | -40.0 OPERATING CELSIUS AND 55.0 OPERATING CELSIUS AND 50.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |