| DUTY CYCLE | INTERMITTENT |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| FRAME SIZE DESIGNATION | AY324 |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| LENGTH OF SHAFT FROM HOUSING | 4.625 INCHES SINGLE END |
| OVERALL HEIGHT | 19.312 INCHES |
| OVERALL LENGTH | 26.687 INCHES |
| OVERALL WIDTH | 15.750 INCHES |
| MOUNTING FACILITY CIRCLE DIAMETER | 12.500 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | FLANGE |
| NOMINAL THREAD SIZE | 1.000 INCHES SINGLE END |
| PHASE | THREE INPUT |
| POWER RATING | 15.0000 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 1200.0 SINGLE NO LOAD AND 1025.0 SINGLE FULL LOAD |
| SHAFT END STYLE | STEPPED AND EXTERNAL THREADED AND FLAT KEYWAY SINGLE END |
| SHAFT DIAMETER | 1.625 INCHES MINIMUM AND 1.750 INCHES MAXIMUM SINGLE END |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND A9 SECOND STYLE AND A12 THIRD STYLE SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| STEP DIAMETER | 1.6250 INCHES NOMINAL SINGLE END |
| TEMP RATING | 40.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-17060A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD LENGTH | 0.6250 INCHES NOMINAL SINGLE END |
| THREAD QUANTITY PER INCH | 18 SINGLE END |
| THREAD SERIES DESIGNATOR | UNS SINGLE END |
| TIME INTERVAL | 30.0 MINUTES MAXIMUM ON |