| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CONTROL FIELD CURRENT RATING IN AMPS | 0.335 |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 313.0 |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 115.0 AC |
| CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED |
| COOLING METHOD | NONVENTILATED |
| CURRENT RATING IN AMPS | 0.220 SINGLE INPUT |
| CURRENT RATING METHOD | NO LOAD |
| CURRENT TYPE | AC INPUT |
| FEATURES PROVIDED | SINGLE PHASE ADAPTABILITY AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FLATTED PORTION LENGTH | 0.3120 INCHES NOMINAL SECOND END |
| FLAT DEPTH | 0.1400 INCHES NOMINAL SECOND END |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES FIRST END |
| LENGTH OF SHAFT FROM HOUSING | 0.531 INCHES SECOND END |
| OVERALL HEIGHT | 2.813 INCHES |
| OVERALL LENGTH | 4.031 INCHES |
| OVERALL WIDTH | 2.375 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| MOUNTING METHOD | PAD |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.437 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.437 INCHES |
| NOMINAL THREAD SIZE | 0.112 INCHES FIRST END |
| PHASE | SINGLE INPUT |
| ROTOR SPEED RATING IN RPM | 11400.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND A4 SECOND STYLE FIRST END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SECOND END |
| SPECIAL FEATURES | MTG HOLES SPOTFACE 0.312IN. DIA IRREGULARLY SPACED ON 2.437 IN. BOLT CIRCLE |
| TAPER | 7.500 PER FOOT IN INCHES FIRST END |
| TAPER LENGTH | 0.179 INCHES MINIMUM AND 0.189 INCHES MAXIMUM FIRST END |
| TEMP RATING | 65.0 AMBIENT CELSIUS AND -55.0 OPERATING CELSIUS AND 55.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 4 SCREW |
| THREAD LENGTH | 0.120 INCHES NOMINAL FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| TORQUE RATING AND TYPE | 3.0 INCH-OUNCES STALLED |