| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| BEARING TYPE | ANNULAR BALL |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | FAN COOLED |
| CURRENT RATING IN AMPS | 34.800 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| KEYWAY WIDTH | 0.2500 INCHES NOMINAL SINGLE END |
| KEYWAY DEPTH | 0.1250 INCHES NOMINAL SINGLE END |
| KEYWAY LENGTH | 1.4375 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 4.375 INCHES SINGLE END |
| OVERALL HEIGHT | 19.375 INCHES |
| OVERALL LENGTH | 35.000 INCHES |
| OVERALL WIDTH | 24.187 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 12.000 INCHES |
| MOUNTING METHOD | FLANGE |
| NOMINAL THREAD SIZE | 0.625 INCHES SINGLE END |
| PHASE | THREE INPUT |
| POWER RATING | 25.0000 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 1200.0 SINGLE NO LOAD AND 1175.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND A29 SECOND STYLE AND A12 THIRD STYLE SINGLE END |
| SHAFT END STYLE | TAPERED AND KEYED AND EXTERNAL THREADED AND STEPPED SINGLE END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| SPECIFIC USE | MAIN CONDENSATE PUMP |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| STEP DIAMETER | 1.2500 INCHES NOMINAL SINGLE END |
| STEP LENGTH | 1.3750 INCHES NOMINAL SINGLE END |
| TAPER LENGTH | 1.8120 INCHES NOMINAL SINGLE END |
| TAPER | 0.600 PER FOOT IN INCHES SINGLE END |
| TEMP RATING | 50.0 OPERATING CELSIUS AND 60.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-M-17060A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD LENGTH | 0.5000 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNC SINGLE END |