|
|
|
National Stock Number:
5999-01-350-8290
Federal Supply Class:
5999
National Item Identification Number:
013508290
Description:
MOUNTING PAD,ELECTRICAL-ELECTRON
Detail:
AN ITEM FABRICATED FROM ELECTRICALLY NONCONDUCTIVE MATERIAL SPECIFICALLY DESIGNED TO PROVIDE A SUPPORT FOR MOUNTING AN ELECTRICAL AND/OR AN ELECTRONIC COMPONENT SUCH AS A SEMICONDUCTOR DEVICE, RELAY, OR RESISTOR INTO THE NEXT HIGHER ASSEMBLY. IT ISOLATES THE COMPONENT FROM THE MOUNTING SURFACE OF THE NEXT HIGHER ASSEMBLY, IT MAY ACT AS A STRAIN RELIEF TO AVOID DAMAGE TO THE COMPONENT SEAL, AND IT MAY PERMIT SOLDERING OF THE COMPONENT TO THE NEXT HIGHER ASSEMBLY WITHOUT DAMAGE. IT INCLUDES HOLES, NOTCHES, OR OTHER PROVISIONS FOR PHYSICAL ALIGNMENT AND SPACING OF ELECTRICAL LEADS AND/OR OTHER MOUNTING FACILITIES PROJECTING FROM THE COMPONENT IT MOUNTS. IT MAY ALSO AFFORD PROTECTION FROM SHOCK OR VIBRATION. IT MAY BE EITHER NONTHERMALLY CONDUCTIVE WHICH PROTECTS THE COMPONENT FROM TEMPERATURE CHANGES IN THE NEXT HIGHER ASSEMBLY OR IT MAY BE THERMALLY CONDUCTIVE WHICH PERMITS HEAT GENERATED IN THE COMPONENT TO BE DRAINED OUT TO A HEAT SINK. FOR ITEMS WHOSE FUNCTION IS ELECTRICAL INSULATION ONLY, SEE INSULATOR, (AS MODIFIED). EXCLUDES HOLDER, (AS MODIFIED); RETAINER, (AS MODIFIED), AND SPACER, PLATE.
|
Manufacturer Information:
| A-55485/06-023D | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | A-A-55485/6 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | M38527/06-023D | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-M-38527/6 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | OVAL | | COLOR | NATURAL | | OVERALL HEIGHT | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | OVERALL LENGTH | 0.300 INCHES NOMINAL | | OVERALL WIDTH | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | MATERIAL | PLASTIC DIALLYL PHTHALATE | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE SINGLE MOUNTING FACILITY | | SPECIFICATION/STANDARD DATA | 58536-A-A-55485/6 GOVERNMENT SPECIFICATION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.035 INCHES NOMINAL SINGLE MOUNTING FACILITY | | TEST DATA DOCUMENT | 58536-A-A-55485 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|