5999-01-202-9731 HEAT SINK,ELECTRICAL-ELECTRONIC Index 5999-01-202-9733 HEAT SINK,ELECTRICAL-ELECTRONIC

National Stock Number:
5999-01-202-9732

Federal Supply Class:
5999

National Item Identification Number:
012029732

Description:
HEAT SINK-INSULATOR

Detail:
AN ITEM WHICH IS SPECIFICALLY DESIGNED TO ABSORB, CONDUCT OR DISSIPATE HEAT GENERATED BY AN ELECTRICAL AND/OR ELECTRONIC COMPONENT OR AN EXTERNAL SOURCE IN ORDER TO PREVENT DAMAGE TO THE COMPONENT. DO NOT USE IF A MORE SPECIFIC NAME APPLIES.


Manufacturer Information:
M87111/01-4Y1881349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M87111/01-6Y3881349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-H-87111/181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NAS411780205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS4117-C3880205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS4117C3880205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
ACCOMMODATED DEVICE MOUNTING HOLE PATTERN STYLESEVEN HOLE
ACCOMMODATED DEVICE MOUNTING HOLE QUANTITY7
OVERALL HEIGHT0.008 INCHES MINIMUM AND 0.010 INCHES MAXIMUM
OVERALL LENGTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
OVERALL WIDTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY3 UNTHREADED HOLE FIRST MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE SECOND MOUNTING FACILITY
SPECIAL FEATURESBORON NITRIDE-FILLED SILICONE RUBBER
SPECIFICATION/STANDARD DATA81349-MIL-H-87111/01 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER0.267 INCHES MINIMUM AND 0.297 INCHES MAXIMUM FIRST MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM SECOND MOUNTING FACILITY


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us