| BINDING METHOD | PLASTIC TAPE |
| CONDUCTOR FORM | STRANDED ALL CONDUCTORS |
| CONDUCTOR QUANTITY | 6 |
| PRECIOUS MATERIAL AND LOCATION | RECEPTACLE CONNECTOR GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.025 GOLD GRAINS, TROY |
| ROUND CONDUCTOR SIZE | 25 AWG ALL CONDUCTORS |
| SPECIAL FEATURES | INSULATION SLEEVING IS ONE-INCH IN LENGTH, UNLESS OTHERWISE SPECIFIED AND WILL BE PLACED AT 12 INCH INTERVALS OR AS REQUIRED. UNUSED CONNECTOR CONTACT POSITIONS SHALL BE FILLED WITH A CONTACT AND, IF REQUIRED, A SEALING PLUG. OVERALL LENGTH IS 8 FEET NOMINAL. TERMINAL PLUGS ON ENDS 3 THROUGH 7 ARE IDENTICAL TO SECOND END. |
| SPECIAL TEST FEATURES | THIS WIRE HARNESS ASSEMBLY SHALL MEET THE FOLLOWING TEST REQUIREMENTS PER MIL-C-3885: A. END TO END CONTINUITY OF LESS THAN 3 OHMS. B. DIELECTRIC WITH STANDING VOLTAGE. NO EVIDENCE OF BREAKDOWN OR FLASH-OVER WHEN 500 VDC IS APPLIED FOR AT LEAST 5 SECONDS. C. INSULATION RESISTANCE OF NOT LESS THAN 100 MEG OHMS. |
| STRAND AWG SIZE PER CONDUCTOR | 33 ALL CONDUCTORS |
| STRAND QUANTITY PER CONDUCTOR | 7 ALL CONDUCTORS |
| TERMINAL COMMERCIAL AND GOVERNMENT ENTITY CODE | 80063 2ND END SINGLE CONDUCTOR |
| TERMINAL COMMERCIAL AND GOVERNMENT ENTITY CODE | 81349 1ST END ALL CONDUCTORS |
| TERMINAL MANUFACTURER IDENTIFYING REFERENCE NUMBER | A3261429 2ND END SINGLE CONDUCTOR |
| TERMINAL MANUFACTURER IDENTIFYING REFERENCE NUMBER | M24308/2-3 1ST END ALL CONDUCTORS |
| TERMINATION TYPE | CONNECTOR PLUG 2ND END SINGLE CONDUCTOR |
| TERMINATION TYPE | CONNECTOR RECEPTACLE 1ST END ALL CONDUCTORS |