| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 31.6700 MILLIMETERS MINIMUM AND 31.8300 MILLIMETERS MAXIMUM |
| ALIGNMENT HOLE DEPTH | 3.2000 MILLIMETERS MINIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 18 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 44.4500 MILLIMETERS NOMINAL |
| FLANGE THICKNESS | 2.3000 MILLIMETERS MINIMUM AND 2.5000 MILLIMETERS MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| OVERALL LENGTH | 76.6000 MILLIMETERS NOMINAL |
| MAXIMUM TEMP RISE | 60.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 62.6000 MILLIMETERS NOMINAL |
| PILOT DIAMETER | 23.8100 MILLIMETERS NOMINAL |
| PILOT LENGTH | 0.9000 MILLIMETERS MINIMUM AND 1.1000 MILLIMETERS MAXIMUM |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -1.0 TO 1.0 |
| ROTOR INPUT CURRENT RATING | 115.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 4.0 WATTS MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 4.7 MILLIMETERS MINIMUM SINGLE SHAFT |
| SHAFT LENGTH | 13.0 MILLIMETERS NOMINAL SINGLE SHAFT |
| SHAFT TYPE | SPLINE SINGLE SHAFT |
| SHOULDER DIAMETER | 39.6700 MILLIMETERS NOMINAL |
| SHOULDER LENGTH | 3.3000 MILLIMETERS MINIMUM AND 3.5000 MILLIMETERS MAXIMUM |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SOLDER LUG W/SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 2.0 CENTIMETER-GRAMS MINIMUM |
| TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 41.0000 MILLIMETERS NOMINAL |
| UNDERCUT WIDTH | 2.0000 MILLIMETERS NOMINAL |