| BODY MATERIAL | ANY ACCEPTABLE |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 9.310 INPUT TO OUTPUT MINIMUM AND 9.690 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0430 NOMINAL INCHES |
| PLUS J ZRO REACTANCE IN OHMS | 150.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 15.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 26.20 NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| OVERALL LENGTH | 1.9860 INCHES MINIMUM AND 2.0060 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 21.60 MINIMUM AND 26.40 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 153.0 MILLIAMPERES MINIMUM AND 187.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 744.0 ALLQJAA3.500 FINISHED-WASHER FACED AND 1.1 WATTS MICROWATTS |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT END PLAY | 0.0020 INCHES MINIMUM AND 0.0050 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.7450 INCHES MINIMUM SINGLE SHAFT AND 0.7650 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 27.20 MINIMUM AND 36.80 MAXIMUM |
| ZRS RESISTANCE IN OHMS | 46.75 MINIMUM AND 63.25 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 6.21 MINIMUM AND 8.40 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 6.75 MINIMUM AND 8.25 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 0.440 ROTOR TO STATOR MINIMUM AND 0.467 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |