| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 18 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 1.7500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| OVERALL LENGTH | 3.0930 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5600 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 15.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 0.9375 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 940.00 NOMINAL |
| SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2470 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT LENGTH | 0.5550 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 1.5620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 545.00 NOMINAL |
| ZRS IMPEDANCE ANGLE IN DEG | 15.00 NOMINAL |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 1070.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 72.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 1687.50 NOMINAL |
| STATOR INPUT CURRENT RATING | 52.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 1.1 WATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |