| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.7430 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 17.00 OUTPUT |
| MAXIMUM TEMP RISE | 15.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7990 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.600 INPUT TO OUTPUT NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 160.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 70.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.03 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT LENGTH | 0.5620 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 3.00 NOMINAL |
| SPECIAL FEATURES | SHIELDED CABLE WITH CONNECTOR SOLDERED TO TERMINALS;SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| ZRO IMPEDANCE ANGLE IN DEG | 80.80 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 2060.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 79.50 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 18.10 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| TRANSFORMATION RATIO | 0.103 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |