| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -14.0/+14.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 5.0 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| III SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 2 STATOR |
| PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 11.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 362.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1900.00 NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| OVERALL LENGTH | 1.6410 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 98.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 27.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 80.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 109.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 560.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 13.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 95.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 377.00 NOMINAL |
| TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION B AND CONNECTION R2 POSITION A AND CONNECTION R3 POSITION C AND CONNECTION S1 POSITION H AND CONNECTION S2 POSITION F AND CONNECTION S3 POSITION J AND CONNECTION S4 POSITION E |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| UNDERCUT DIAMETER | 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |