| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| BODY MATERIAL | STEEL, STAINLESS |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.3220 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 4.19 OUTPUT |
| MAXIMUM TEMP RISE | 10.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 7.86 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6400 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 0.8750 INCHES NOMINAL |
| SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.185 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT LENGTH | 0.5650 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3550 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ZRS IMPEDANCE ANGLE IN DEG | 26.00 MINIMUM AND 33.00 MAXIMUM |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 1050.00 MINIMUM AND 1300.00 MAXIMUM |
| ZSO IMPEDANCE ANGLE IN DEG | 78.80 MINIMUM AND 84.50 MAXIMUM |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 7800.00 MINIMUM AND 9512.00 MAXIMUM |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 1.31 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 2.4 MILLIWATTS NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |