| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| BODY MATERIAL | ALUMINUM ALLOY |
| BODY SIZE | 31 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 3.1000 INCHES NOMINAL |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| OVERALL LENGTH | 4.1200 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| MAXIMUM TEMP RISE | 10.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.3800 INCHES MAXIMUM |
| PILOT DIAMETER | 0.2405 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.400 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.3750 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 53.60 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 191.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 2.26 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.2405 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.7300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.390 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3130 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 2.7000 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1850 INCHES NOMINAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/139 GOVERNMENT SPECIFICATION |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 52.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 83.20 NOMINAL |
| ZRO RESISTANCE IN OHMS | 693.00 NOMINAL |
| ZSS IMPEDANCE ANGLE IN DEG | 20.00 NOMINAL |
| ZSS RESISTANCE IN OHMS | 63.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 2.7500 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0250 INCHES NOMINAL |