| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 30.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 20 |
| BODY STYLE | STANDARD ROUND A |
| COMPENSATION METHOD | WINDING COMPENSATED |
| FLANGE DIAMETER | 1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| OVERALL LENGTH | 1.6530 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 INPUT |
| MAXIMUM TEMP RISE | 10.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.1650 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 0.100 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0480 INCHES MAXIMUM |
| PILOT DIAMETER | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | 2 ROTOR, 2 STATOR, 2 COMPENSATOR, 2 RESISTOR |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4100 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT RADIAL PLAY TEST POINT | 0.250 INCHES NOMINAL |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 500.00 MAXIMUM |
| ZSO IMPEDANCE ANGLE IN DEG | 35.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 500000.00 MINIMUM |
| STATOR INPUT CURRENT RATING | 30.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 20.0 MAXIMUM |
| TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION H AND CONNECTION R2 POSITION G AND CONNECTION R3 POSITION E AND CONNECTION R4 POSITION J AND CONNECTION S1 POSITION L AND CONNECTION S2 POSITION M AND CONNECTION S3 POSITION K AND CONNECTION S4 POSITION N AND CONNECTION C1 POSITION D AND CONNECTION C2 POSITION C AND CONNECTION C3 POSITION A AND CONNECTION C4 POSITION B |
| TERMINAL LOCATION | SIDE |
| TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.1 MAXIMUM |
| TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.8750 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |