| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | STEEL, STAINLESS |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.6300 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 50.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 8.500 OUTPUT TO INPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 3550.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 390.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 640.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 440.00 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| SHAFT DIAMETER | 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3350 INCHES NOMINAL SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 124.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 720.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 1070.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 145.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 18.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 35.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 2.203 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |