ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.27 CENTIMETER-GRAMS NOMINAL |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.54 CENTIMETER-GRAMS NOMINAL |
BODY MATERIAL | ALUMINUM ALLOY |
BODY SIZE | 8 |
BODY STYLE | STANDARD ROUND A |
FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
FRAGILITY FACTOR | MODERATELY RUGGED |
FREQUENCY IN HERTZ | 400.0 NOMINAL |
OVERALL LENGTH | 1.7900 INCHES MAXIMUM |
MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
PHASE SHIFT ANGLE IN DEG | 7.600 INPUT TO OUTPUT NOMINAL |
PILOT LENGTH | 0.0390 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
PLUS J ZRO REACTANCE IN OHMS | 256.00 NOMINAL |
PLUS J ZRS REACTANCE IN OHMS | 19.00 NOMINAL |
PLUS J ZSO REACTANCE IN OHMS | 44.00 NOMINAL |
RECEIVER ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
ROTOR INPUT CURRENT RATING | 110.0 AMPERES MAXIMUM |
ROTOR INPUT ELECTRICAL POWER RATING | 564.0 MILLIWATTS MAXIMUM |
ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
ZRO RESISTANCE IN OHMS | 47.00 NOMINAL |
ZRS RESISTANCE IN OHMS | 83.00 NOMINAL |
ZSO RESISTANCE IN OHMS | 11.20 NOMINAL |
TERMINAL LOCATION | REAR |
TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
TORQUE GRADIENT PER ANGULAR DEG | 2200.0 MILLIMETER-MILLIGRAMS NOMINAL |