| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | STEEL, STAINLESS |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 29.7 MINIMUM AND 30.3 MAXIMUM |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| OVERALL LENGTH | 2.4400 INCHES MINIMUM AND 2.4600 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.120 INCHES |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7750 INCHES MINIMUM AND 1.7810 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 50.000 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 1350.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 700.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 650.00 NOMINAL |
| PLUS J ZSS REACTANCE IN OHMS | 300.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 1116.00 MINIMUM AND 1364.00 MAXIMUM |
| SECURING HOLE QUANTITY | 3 |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0015 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| SHAFT MAXIMUM RADIAL PLAY | 0.0004 INCHES |
| SHAFT NOMINAL THREAD SIZE | 0.184 INCHES SINGLE SHAFT |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2100 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5300 INCHES MINIMUM AND 0.5500 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.1315 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 1250.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 1900.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 670.00 NOMINAL |
| ZSS RESISTANCE IN OHMS | 930.00 NOMINAL |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 5.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 576.00 MINIMUM AND 704.00 MAXIMUM |
| STATOR INPUT CURRENT RATING | 6.2 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 30.0 MILLIWATTS MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 8 SCREW |
| TRANSFORMATION RATIO | 0.960 STATOR TO ROTOR MINIMUM AND 1.040 STATOR TO ROTOR MAXIMUM |