| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| COMPENSATION METHOD | WINDING COMPENSATED |
| FLANGE DIAMETER | 0.7500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| OVERALL LENGTH | 1.7400 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 10.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 12.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 350.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1930.00 NOMINAL |
| SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SPECIAL FEATURES | TWO MATCHED SET RESISTORS 200K PORM 1 PCT |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ZRS RESISTANCE IN OHMS | 995.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 615.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
| TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR MINIMUM AND 2.002 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.6910 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |