| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.10 INCH-OUNCES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND, ROTATABLE STATOR C |
| COMPENSATION METHOD | WINDING COMPENSATED |
| FLANGE DIAMETER | 1.0750 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0960 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| OVERALL LENGTH | 3.6500 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| MAXIMUM TEMP RISE | 10.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.1000 INCHES MAXIMUM |
| SPECIAL FEATURES | 1 SPUR GEAR WITH 83 TEETH AND DIAMETRAL PITCH OF 80 |
| PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 0.150 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0650 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1247 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5950 INCHES MINIMUM AND 0.6150 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0200 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0150 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0650 INCHES MAXIMUM |
| STATOR INPUT CURRENT RATING | 30.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| TRANSFORMATION RATIO | 1.0000 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9800 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0750 INCHES MAXIMUM |