| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES NOMINAL |
| AFT OF FIRST FLANGE DIAMETER | 1.9995 INCHES MAXIMUM |
| BODY DIAMETER | 1.9900 INCHES MAXIMUM |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 23 |
| BODY STYLE | STANDARD ROUND D |
| FLANGE DIAMETER | 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2500 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| OVERALL LENGTH | 4.3150 INCHES MAXIMUM |
| MAXIMUM TEMP RISE | 44.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.5820 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 9.900 INPUT TO OUTPUT NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 525.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 78.70 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 219.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 95.60 NOMINAL |
| ROTOR INPUT CURRENT RATING | 190.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 4.5 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| SECOND SHOULDER DIAMETER | 1.9995 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.1700 INCHES MAXIMUM |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0025 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT LENGTH | 0.6760 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | SPLINE SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9900 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.2500 INCHES NOMINAL |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 53.60 NOMINAL |
| SPECIAL FEATURES | SLEEVE PRESSED ON SHAFT;SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| ZRO RESISTANCE IN OHMS | 215.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 262.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 77.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.120 INCH-OUNCES MINIMUM |
| TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |