| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 8.0 CENTIMETER-GRAMS MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES MAXIMUM |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND C |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 500.00 NOMINAL |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.980 ROTOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| OVERALL LENGTH | 2.4860 INCHES NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9160 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2700.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 2500.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 330.00 NOMINAL |
| SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT LENGTH | 0.5700 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 380.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 6.5 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 20.0 MILLIWATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 0.5 MINIMUM AND 26.0 MAXIMUM |
| ZCO IMPEDANCE MAGNITUDE IN OHMS | 600.00 NOMINAL |
| ZCO IMPEDANCE ANGLE IN DEG | 2500.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 450.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 450.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| TRANSFORMATION RATIO | 0.975 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |