| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.2000 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| ALIGNMENT HOLE DEPTH | 0.1200 INCHES NOMINAL |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND B |
| COMPENSATOR DC RESISTANCE IN OHMS | 0.02 NOMINAL |
| COMPENSATION METHOD | WINDING COMPENSATED |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 1000.0 NOMINAL |
| OVERALL LENGTH | 2.4940 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 40.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 50.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9540 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 4.30 NOMINAL |
| SHAFT DIAMETER | 0.1870 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.185 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2840 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8750 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 6.27 NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 23.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |