| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -0.1 TO 0.1 |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1100 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND B |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 520.00 NOMINAL |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.980 STATOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.4560 INCHES NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9160 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0132 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 0.8570 INCHES NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 2500.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 320.00 NOMINAL |
| SHAFT DIAMETER | 0.1870 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.1900 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ZSO RESISTANCE IN OHMS | 480.00 NOMINAL |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 390.00 NOMINAL |
| TERMINAL LOCATION | FRONT |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |