| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 5.0 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0620 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 10 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.6940 INCHES NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.05 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2810 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 18.000 INPUT TO OUTPUT NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 670.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 74.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 170.00 NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.0850 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0210 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0150 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT LENGTH | 0.4130 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0630 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 270.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 330.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 43.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| TRANSFORMATION RATIO | 0.453 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.8370 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |