| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.00 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 7.00 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.5140 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 6.900 INPUT TO OUTPUT NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 49.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 5.70 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 40.00 NOMINAL |
| SHAFT DIAMETER | 0.1198 INCHES NOMINAL REAR SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM FRONT SHAFT |
| SHAFT SLOT DEPTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM FRONT SHAFT |
| SHAFT SLOT DEPTH | 0.0260 INCHES NOMINAL REAR SHAFT |
| SHAFT SLOT WIDTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM FRONT SHAFT |
| SHAFT SLOT WIDTH | 0.0260 INCHES NOMINAL REAR SHAFT |
| SHAFT TYPE | ROUND, SLOTTED BOTH SHAFTS |
| SHAFT LENGTH | 0.4370 INCHES NOMINAL REAR SHAFT |
| SHAFT LENGTH | 0.4770 INCHES NOMINAL FRONT SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| STATOR INPUT CURRENT RATING | 350.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 1.0 WATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.2 NOMINAL |
| ZRO RESISTANCE IN OHMS | 8.60 NOMINAL |
| ZRS RESISTANCE IN OHMS | 10.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 8.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 0.100 MILLIMETER-MILLIGRAMS NOMINAL |
| TRANSFORMATION RATIO | 1.098 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |