| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 5.00 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8750 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.0690 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.5910 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 4.500 OUTPUT TO INPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 132.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 14.70 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 22.80 NOMINAL |
| PLUS J ZSO-90 REACTANCE IN OHMS | 7.30 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 9.50 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM BOTH SHAFTS |
| SHAFT LENGTH | 0.3750 INCHES MINIMUM AND 0.4780 INCHES MAXIMUM BOTH SHAFTS |
| SHAFT SLOT DEPTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM BOTH SHAFTS |
| SHAFT SLOT WIDTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM BOTH SHAFTS |
| SHAFT TYPE | ROUND, SLOTTED BOTH SHAFTS |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| STATOR INPUT CURRENT RATING | 225.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 1.2 WATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 3.80 NOMINAL |
| ZRO RESISTANCE IN OHMS | 23.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 23.60 NOMINAL |
| ZSO RESISTANCE IN OHMS | 5.80 NOMINAL |
| ZSO-90 RESISTANCE IN OHMS | 3.60 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| UNDERCUT DIAMETER | 2.4440 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |