| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 12.00 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS MAXIMUM |
| BODY SIZE | 13 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7450 INCHES MINIMUM AND 0.7530 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.6680 INCHES NOMINAL |
| MAXIMUM TEMP RISE | 9.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 13.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| PLUS J ZRS REACTANCE IN OHMS | 38.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 50.00 MINIMUM AND 68.00 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 114.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 650.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3780 INCHES MINIMUM AND 0.4020 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 15.30 MINIMUM AND 20.70 MAXIMUM |
| ZRO IMPEDANCE ANGLE IN DEG | 71.00 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 52.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 120.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 75.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 269.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 0.436 ROTOR TO STATOR MINIMUM AND 0.472 ROTOR TO STATOR MAXIMUM |
| UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |