| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.33 INCH-OUNCES NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.11 INCH-OUNCES NOMINAL |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| COMPENSATION METHOD | NETWORK COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 399.50 MINIMUM AND 540.50 MAXIMUM |
| COMPENSATOR RESONANT FREQUENCY IN HERTZ | 70000.0 |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| OVERALL LENGTH | 2.3450 INCHES NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9700 INCHES NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 5.500 INPUT TO OUTPUT MINIMUM AND 11.500 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2398.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1827.00 MINIMUM AND 2233.00 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 276.25 MINIMUM AND 373.75 MAXIMUM |
| SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| STATOR INPUT CURRENT RATING | 5.0 MILLIAMPERES NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 233.75 MINIMUM AND 316.25 MAXIMUM |
| ZRO RESISTANCE IN OHMS | 331.50 MINIMUM AND 448.50 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 318.75 MINIMUM AND 431.25 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| TRANSFORMATION RATIO | 0.963 ROTOR TO STATOR MINIMUM AND 0.987 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0450 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |