| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 30.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 10.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0980 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.1930 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6620 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 3.900 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0450 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 112.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 13.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 19.00 NOMINAL |
| PLUS J ZSO-90 REACTANCE IN OHMS | 5.70 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 8.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 226.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.25 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| SHAFT END PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT LENGTH | 0.5310 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT SLOT DEPTH | 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3120 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1370 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 3.60 NOMINAL |
| SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| ZRO RESISTANCE IN OHMS | 19.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 21.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 4.70 NOMINAL |
| ZSO-90 RESISTANCE IN OHMS | 3.30 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| UNDERCUT DIAMETER | 1.3150 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0880 INCHES MAXIMUM |