| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8720 INCHES MINIMUM AND 0.8780 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4380 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.2250 INCHES MINIMUM AND 2.2870 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 12.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 18.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MINIMUM AND 1.6620 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| ROTOR INPUT CURRENT RATING | 250.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.4 WATTS MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM BOTH SHAFTS |
| SHAFT SLOT DEPTH | 0.0300 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM BOTH SHAFTS |
| SHAFT SLOT WIDTH | 0.0200 INCHES MINIMUM AND 0.0250 INCHES MAXIMUM BOTH SHAFTS |
| SHAFT TYPE | ROUND, SLOTTED BOTH SHAFTS |
| SHAFT LENGTH | 0.2500 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM BOTH SHAFTS |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1310 INCHES NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 112.00 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 18.00 NOMINAL |
| ZSS IMPEDANCE ANGLE IN DEG | 19.00 NOMINAL |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 4.70 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |