| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8150 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 2323.0000 INCHES NOMINAL |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 318.75 MINIMUM AND 431.25 MAXIMUM |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.0 |
| OVERALL LENGTH | 2.2880 INCHES MINIMUM AND 2.3260 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.70 |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9700 INCHES NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 5.500 INPUT TO OUTPUT MINIMUM AND 11.500 INPUT TO OUTPUT MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 1717.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1725.50 MINIMUM AND 2304.50 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 263.50 MINIMUM AND 356.50 MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 29.0 NOMINAL |
| SECURING HOLE QUANTITY | 4 |
| SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT LENGTH | 0.3260 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 289.00 MINIMUM AND 391.00 MAXIMUM |
| ZRO RESISTANCE IN OHMS | 412.25 MINIMUM AND 557.75 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 363.80 MINIMUM AND 472.20 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| TRANSFORMATION RATIO | 0.963 ROTOR TO STATOR MINIMUM AND 0.987 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |