| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND C |
| COMPENSATION METHOD | RESISTOR COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 265.50 MINIMUM AND 324.50 MAXIMUM |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 15.000 ROTOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| OVERALL LENGTH | 2.2730 INCHES MINIMUM AND 2.4030 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8920 INCHES MINIMUM AND 1.9540 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT MINIMUM AND 8.000 INPUT TO OUTPUT MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 180.00 MINIMUM AND 220.00 MAXIMUM |
| SHAFT DIAMETER | 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3810 INCHES MINIMUM AND 0.4490 INCHES MAXIMUM SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3117 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 265.50 MINIMUM AND 324.50 MAXIMUM |
| STATOR INPUT CURRENT RATING | 45.0 MILLIAMPERES NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 30.0 MINIMUM AND 45.0 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 TAB, SOLDER LUG |
| TRANSFORMATION RATIO | 0.960 ROTOR TO STATOR MINIMUM AND 1.000 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 1.3090 INCHES MINIMUM AND 1.3150 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |