| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.2470 INCHES MINIMUM AND 1.2530 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 18 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.7470 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 3.0700 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5200 INCHES MAXIMUM |
| PILOT DIAMETER | 0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -1.0 TO 1.0 |
| ROTOR INPUT CURRENT RATING | 245.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 3.4 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 90.0 MINIMUM AND 115.0 MAXIMUM |
| SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT LENGTH | 0.5300 INCHES MINIMUM AND 0.5500 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.036 INCH-OUNCES NOMINAL |
| UNDERCUT DIAMETER | 1.6220 INCHES MINIMUM AND 1.6280 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |