| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 30 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 2.9590 INCHES MINIMUM AND 2.9620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.1570 INCHES MINIMUM AND 0.1630 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 6.6340 INCHES MINIMUM AND 6.6400 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 50.00 OUTPUT |
| MAXIMUM TEMP RISE | 60.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 125.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 5.6450 INCHES MINIMUM AND 5.6510 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 2008987-10001 GRADE |
| PILOT DIAMETER | 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ROTOR INPUT CURRENT RATING | 1.5 AMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 10.0 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.2403 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.239 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT LENGTH | 0.7000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 2.6840 INCHES MINIMUM AND 2.6900 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.2240 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.600 INCH-OUNCES NOMINAL |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.1250 INCHES NOMINAL |