| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| BODY DIAMETER | 2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| BODY SIZE | 28 |
| BODY STYLE | STANDARD ROUND, ROTATABLE HOUSING |
| FLANGE DIAMETER | 3.0990 INCHES MINIMUM AND 3.1000 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2450 INCHES MINIMUM AND 2.2550 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| OVERALL LENGTH | 4.6550 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.3850 INCHES NOMINAL |
| NONDEFINITIVE SPEC/STD DATA | 31TDX68 TYPE |
| PHASE SHIFT ANGLE IN DEG | 6.500 INPUT TO OUTPUT NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 24.00 MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 Y-STATOR |
| SHAFT END PLAY | 0.0010 INCHES MINIMUM AND 0.0050 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.2405 INCHES NOMINAL SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT THREAD LENGTH | 0.6900 INCHES MINIMUM AND 0.7100 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.7200 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | SPLINE SINGLE SHAFT |
| SHOULDER DIAMETER | 2.6999 INCHES MINIMUM AND 2.7000 INCHES MAXIMUM |
| SHOULDER LENGTH | 1.0150 INCHES MINIMUM AND 1.0250 INCHES MAXIMUM |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 19.00 MAXIMUM |
| STATOR INPUT CURRENT RATING | 748.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 7.7 WATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| ZRS RESISTANCE IN OHMS | 44.00 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.300 INCH-OUNCES MAXIMUM |
| TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |