| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LINEARITY IN PERCENT | 0.50 |
| OUTPUT VOLTAGE CHANGE PER DEG IN VOLTS | 0.3 |
| OVERALL LENGTH | 1.9750 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 5.00 OUTPUT |
| MAXIMUM LINEAR RANGE IN DEG | -50.0 TO 50.0 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 2.100 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 16300.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 127.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 820.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 7.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 101.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 62.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 2060.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 68.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |