| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 12.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 50.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 10 |
| ZRO RESISTANCE IN OHMS | 595.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2130.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 126.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 427.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 750.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 369.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 410.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 126.00 NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 11.000 INPUT TO OUTPUT NOMINAL |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 20.00 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS MAXIMUM |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND |
| 0.8123 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| OVERALL LENGTH | 1.9120 INCHES NOMINAL |
| FLANGE DIAMETER | 0.9370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND |
| 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0630 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2490 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0500 INCHES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| SHAFT TYPE | ROUND, SLOTTED FRONT SHAFT |
| ROUND REAR SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |
| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4130 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0320 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | SIDE |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| SPECIAL FEATURES | REAR SHAFT DIM. 0.2500 IN. NOM LG,0.0895 IN. MIN. 0.0900 IN. MAX LG |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 81413 |
| DESIGN CONTROL REFERENCE | 757-2-2613 |