| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 20.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.4 CENTIMETER-GRAMS MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0620 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 10 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.0920 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 11.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2130.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 427.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 409.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 10.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 100.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM BOTH SHAFTS |
| SHAFT LENGTH | 0.3750 INCHES NOMINAL REAR SHAFT |
| SHAFT LENGTH | 0.4760 INCHES NOMINAL FRONT SHAFT |
| SHAFT SLOT DEPTH | 0.0470 INCHES NOMINAL BOTH SHAFTS |
| SHAFT SLOT WIDTH | 0.0470 INCHES NOMINAL BOTH SHAFTS |
| SHAFT TYPE | ROUND, SLOTTED BOTH SHAFTS |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0630 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 126.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 595.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 126.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |