| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 45.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 15.0 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 22 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 2.1610 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.1250 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 3.2370 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 19.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6340 INCHES MAXIMUM |
| PILOT DIAMETER | 0.7500 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 1.500 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0600 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 5.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 35.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 0.58 NOMINAL |
| ROTOR INPUT CURRENT RATING | 1.0 AMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 4.0 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| SHAFT DIAMETER | 1.8500 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0010 INCHES MAXIMUM |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0015 INCHES |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT SLOT DEPTH | 0.0470 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9995 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.2000 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 0.26 NOMINAL |
| SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| ZRO RESISTANCE IN OHMS | 1.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 5.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 0.454 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 2.0000 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0950 INCHES MINIMUM |