| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -25.0 TO 25.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 10000.00 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3000.00 CENTIMETER-GRAMS MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6950 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0600 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.1550 INCHES NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6870 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 6.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 120.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 25.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 14.90 MINIMUM AND 18.10 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 205.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.6 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT HOLE DIAMETER | 0.0730 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.4680 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.1480 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.1002 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 4.30 MINIMUM AND 5.10 MAXIMUM |
| SPECIAL FEATURES | SHAFT END TAP NO. 1-72 NF-3B,0.1720 IN. NOM DEEP |
| ZRO RESISTANCE IN OHMS | 40.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 4.80 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9620 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |