| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG |
| BODY STYLE | STANDARD ROUND B |
| BODY SIZE | 11 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ZRO RESISTANCE IN OHMS | 78.10 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 550.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 150.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 180.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 159.50 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 124.70 NOMINAL |
| TRANSFORMATION RATIO | 0.484 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.500 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 1.0000 INCHES NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| OVERALL LENGTH | 2.8640 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0700 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7090 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.4000 INCHES NOMINAL SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNC SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.1872 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |