| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL, STAINLESS |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| OVERALL LENGTH | 2.5730 INCHES NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9230 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 3.500 OUTPUT TO INPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 2770.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 251.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 2770.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 200.00 NOMINAL |
| SHAFT DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.1872 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 170.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 370.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 370.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 370.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 45.0 MILLIAMPERES NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 60.0 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 8 PIN |
| TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |