| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AFT OF SECOND FLANGE DIAMETER | 4.8750 INCHES NOMINAL |
| BODY DIAMETER | 5.3750 INCHES MAXIMUM |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 58 |
| BODY STYLE | STANDARD ROUND DOUBLE FLANGE A |
| DISTANCE BETWEEN FLANGES | 3.2500 INCHES NOMINAL |
| FLANGE DIAMETER | 5.7480 INCHES MINIMUM AND 5.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| OVERALL LENGTH | 9.2100 INCHES MAXIMUM |
| MAXIMUM TEMP RISE | 50.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 6.6180 INCHES NOMINAL |
| SHOULDER LENGTH | 1.0600 INCHES NOMINAL |
| PILOT LENGTH | 0.2500 INCHES NOMINAL |
| PILOT DIAMETER | 1.7500 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 660.00 NOMINAL |
| SECOND SHOULDER DIAMETER | 5.5000 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.5000 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.3500 INCHES MINIMUM AND 0.3505 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 1.0320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 3.5 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.2500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TIP LENGTH | 0.2200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, TAPERED, THREADED, UNDERCUT SINGLE SHAFT |
| SHAFT UNDERCUT DIAMETER | 0.0600 INCHES NOMINAL SINGLE SHAFT |
| SHAFT UNDERCUT WIDTH | 0.0600 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 4.8740 INCHES MAXIMUM |
| SPECIAL FEATURES | SHAFT KEYED WITH NO. 00 WOODRUFF KEYWHITNEY NO. 207 |
| ZRO RESISTANCE IN OHMS | 400.00 NOMINAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-2335 GOVERNMENT SPECIFICATION |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 3.5 AMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 30.0 WATTS MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-S-2335 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TORQUE GRADIENT PER ANGULAR DEG | 4.000 INCH-OUNCES MINIMUM |
| TRANSFORMATION RATIO | 0.990 ROTOR TO STATOR NOMINAL |